Proceedings of nanoGe September Meeting 2017 (NFM17)
Publication date: 20th June 2016
In order to economically generate renewable hydrogen fuel from solar energy using semiconductor-based devices, the U.S. Department of Energy Fuel Cells Technology Office has established technical targets of over 20% solar-to-hydrogen (STH) efficiency with several thousand hours of stability under operating conditions [1]. We have modeled attainable efficiencies of tandem absorbers that, for the first time, considered the absorption of sunlight by water [2]. We used this modeling to identify top and bottom semiconductor bandgap combinations that should be targeted to achieve maximal STH efficiency.
We had to employ several key solid-state technological advances to achieve STH efficiencies exceeding 16% [3]. The first improvement was to increase the device current via a non-lattice-matched 1.2 eV InGaAs grown using the inverted metamorphic multijunction technique developed by NREL’s III-V photovoltaics group. The second modification was to add a thin n-GaInP2 layer to p-GaInP2 to generate a "buried junction", which increased the photocurrent onset or Voc of the device by several hundred mV and enabled 14% STH efficiency. Finally, we increased the top junction photon conversion efficiency by adding an AlInP "window layer", which is commonly used in solid-state PV devices to reduce surface recombination. Through the use of a collimating tube, we measured our devices outdoors under direct solar illumination and verified over 16% STH conversion efficiency. I will also briefly introduce pitfalls of common experimental procedures that can influence the accuracy of measured STH efficiencies, which can be exaggerated for mulitjunction absorbers.
The largest loss in our current system is reflection at the semiconductor/electrolyte interface, so I will address the photon management strategies we use to achieve greater parity between measured efficiency and the theoretical limit. Capturing a significant portion of the ~25% of photons lost to reflection at this interface should allow the realization of devices that exceed 20% STH efficiency.
[1] http://energy.gov/sites/prod/files/2015/06/f23/fcto_myrdd_production.pdf
[2] H. Döscher et al., Energy Environ. Sci. 7, 2951 (2016).
[3] J. Young et al., Nature Energy, 2, 17028 (2017).
nanoGe is a prestigious brand of successful science conferences that are developed along the year in different areas of the world since 2009. Our worldwide conferences cover cutting-edge materials topics like perovskite solar cells, photovoltaics, optoelectronics, solar fuel conversion, surface science, catalysis and two-dimensional materials, among many others.
Previously nanoGe Spring Meeting (NSM) and nanoGe Fall Meeting (NFM), MATSUS is a multiple symposia conference focused on a broad set of topics of advanced materials preparation, their fundamental properties, and their applications, in fields such as renewable energy, photovoltaics, lighting, semiconductor quantum dots, 2-D materials synthesis, charge carriers dynamics, microscopy and spectroscopy semiconductors fundamentals, etc.
International Conference on Hybrid and Organic Photovoltaics
International Conference on Hybrid and Organic Photovoltaics (HOPV) is celebrated yearly in May. The main topics are the development, function and modeling of materials and devices for hybrid and organic solar cells. The field is now dominated by perovskite solar cells but also other hybrid technologies, as organic solar cells, quantum dot solar cells, and dye-sensitized solar cells and their integration into devices for photoelectrochemical solar fuel production.
Asia-Pacific International Conference on Perovskite, Organic Photovoltaics and Optoelectronics
The main topics of the Asia-Pacific International Conference on Perovskite, Organic Photovoltaics and Optoelectronics (IPEROP) are discussed every year in Asia-Pacific for gathering the recent advances in the fields of material preparation, modeling and fabrication of perovskite and hybrid and organic materials. Photovoltaic devices are analyzed from fundamental physics and materials properties to a broad set of applications. The conference also covers the developments of perovskite optoelectronics, including light-emitting diodes, lasers, optical devices, nanophotonics, nonlinear optical properties, colloidal nanostructures, photophysics and light-matter coupling.
The International Conference on Perovskite Thin Film Photovoltaics Perovskite Photonics and Optoelectronics (NIPHO) is the best place to hear the latest developments in perovskite solar cells as well as on recent advances in the fields of perovskite light-emitting diodes, lasers, optical devices, nanophotonics, nonlinear optical properties, colloidal nanostructures, photophysics and light-matter coupling.