Enhanced oxygen evolution from (de-)alloyed nickel thin film electrodes

Joris Proost^a, Raphaël Poulain^a, Adeline Delvaux^a, Quentin Van Overmeere^b

^aUniversité catholique de Louvain, Division of Materials and Process Engineering, Place Sainte Barbe 2, Louvain-la-Neuve, 1348

^bParc, Xerox Company, 3333 Coyote Hill Road, Palo Alto, 94304

Materials for Sustainable Development Conference (MATSUS)
Proceedings of September Meeting 2016 (NFM16)

Berlin, Germany, 2016 September 5th - 13th

Organizers: Marin Alexe, Enrique Cánovas, Celso de Mello Donega, Ivan Infante, Thomas Kirchartz, Maksym Kovalenko, Federico Rosei, Lukas Schmidt-Mende, Laurens Siebbeles, Peter Strasser, Teodor K Todorov, Roel van de Krol and Ulrike Woggon

Poster, Adeline Delvaux, 033
Publication date: 14th June 2016

Water electrolysis from renewable electricity may enable the widespread use of hydrogen as a high energy density carrier with no point-of-use emissions. Production of hydrogen by water electrolysis has already been intensively studied, but efficiency of electrochemical cells still needs to be improved before they can be used on larger scales. The electrochemical performance of the electrodes itself is currently still one of the limiting factors. Improvements in efficiency can be obtained by increasing the rate of electron transfer between water and the electrode, or by improving mass transport of reactants and gaseous products. The objective of this work consists in improving the mass transfer aspect by tailoring the electrode morphology in order to favor bubble detachment. Indeed, inefficient gas bubble detachment from the electrode surface results in higher overpotentials due to blockage of active sites. In this respect, earlier reports have shown how optimal synthesis conditions for DSA-type anodes leading to mud-crack type surfaces showed enhanced bubble detachment for the oxygen evolution reaction [1].

In the current contribution, we use (de-)alloyed nickel thin film electrodes to evaluate performance enhancements resulting from improved bubble detachment at the electrode surface. Nickel is a primary candidate material for the oxygen evolution reaction (OER) due to its low cost, relative abundance, high activity and its long-term stability in alkaline solutions. Our nanostructured nickel electrodes were obtained by first magnetron co-sputtering of Al-Ni alloys from pure Ni and Al targets, followed by selective Al leaching in concentrated hydroxide solutions. The use of such de-alloyed thin films was shown to allow to distinguish between improvements resulting from changes of the specific surface area and from the morphology. Cyclic voltammetry on this new type of de-alloyed electrodes shows a significant decrease of the overpotential for the oxygen evolution reaction as compared with pure Ni electrodes, a drop of 140 mV at 10 mA/cm² being obtained in the best case. The aim of this study will then be to discuss on the one hand the morphology and microstructure of these de-alloyed Ni electrodes as a function of their processing conditions combining ICP-OES, XRD, ECSA and AFM analysis, and on the other hand to demonstrate how these structural features have lead to the observed enhanced electrochemical performance for the OER.

[1] A.R. Zeradjanin, A.A. Topalov, Q. Van Overmeere, S. Cherevko, X. Chen, E. Ventosa, W. Schuhmann, K.J.J. Mayrhofer, RSC Adv. 4 (2014) 9579.

nanoGe is a prestigious brand of successful science conferences that are developed along the year in different areas of the world since 2009. Our worldwide conferences cover cutting-edge materials topics like perovskite solar cells, photovoltaics, optoelectronics, solar fuel conversion, surface science, catalysis and two-dimensional materials, among many others.

MATSUS

Previously nanoGe Spring Meeting (NSM) and nanoGe Fall Meeting (NFM), MATSUS is a multiple symposia conference focused on a broad set of topics of advanced materials preparation, their fundamental properties, and their applications, in fields such as renewable energy, photovoltaics, lighting, semiconductor quantum dots, 2-D materials synthesis, charge carriers dynamics, microscopy and spectroscopy semiconductors fundamentals, etc.

International Conference on Hybrid and Organic Photovoltaics

International Conference on Hybrid and Organic Photovoltaics (HOPV) is celebrated yearly in May. The main topics are the development, function and modeling of materials and devices for hybrid and organic solar cells. The field is now dominated by perovskite solar cells but also other hybrid technologies, as organic solar cells, quantum dot solar cells, and dye-sensitized solar cells and their integration into devices for photoelectrochemical solar fuel production.

Asia-Pacific International Conference on Perovskite, Organic Photovoltaics and Optoelectronics

The main topics of the Asia-Pacific International Conference on Perovskite, Organic Photovoltaics and Optoelectronics (IPEROP) are discussed every year in Asia-Pacific for gathering the recent advances in the fields of material preparation, modeling and fabrication of perovskite and hybrid and organic materials. Photovoltaic devices are analyzed from fundamental physics and materials properties to a broad set of applications. The conference also covers the developments of perovskite optoelectronics, including light-emitting diodes, lasers, optical devices, nanophotonics, nonlinear optical properties, colloidal nanostructures, photophysics and light-matter coupling.

International Conference on Perovskite Thin Film Photovoltaics Perovskite Photonics and Optoelectronics

The International Conference on Perovskite Thin Film Photovoltaics Perovskite Photonics and Optoelectronics (NIPHO) is the best place to hear the latest developments in perovskite solar cells as well as on recent advances in the fields of perovskite light-emitting diodes, lasers, optical devices, nanophotonics, nonlinear optical properties, colloidal nanostructures, photophysics and light-matter coupling.