Industrial viability of single-component organic solar cells

Yakun He^a^,^b, Ning Li^a, Thomas Heumüller^a, Jonas Wortmann^a, Benedict Hanisch^a, Anna Aubele^c, Sebastian Lucas^c, Guitao Feng^d, Xudong Jiang^d, Weiwei Li^d, Peter Bäuerle^c, Christoph Brabec^a

^aInstitute of Materials for Electronics and Energy Technology (i-MEET), Friedrich-Alexander-Universität Erlangen-Nürnberg, Martensstrasse 7, 91058 Erlangen, Germany

^bKAUST Solar Center, King Abdullah University of Science and Technology, Thuwal 23955, Saudi Arabia

^cInstitute of Organic Chemistry II and Advanced Materials, University of Ulm, Albert-Einstein-Allee 11 89081 Ulm, Germany

^dBeijing National Laboratory for Molecular Sciences, Key Laboratory of Organic Solids, Institute of Chemistry, Chinese Academy of Sciences (ICCAS), Beijing, 100190 P. R. China

International Conference on Hybrid and Organic Photovoltaics
Proceedings of International Conference on Hybrid and Organic Photovoltaics (HOPV23)

London, United Kingdom, 2023 June 12th - 14th

Organizers: Tracey Clarke, James Durrant and Trystan Watson

Oral, Yakun He, presentation 192
DOI: https://doi.org/10.29363/nanoge.hopv.2023.192
Publication date: 30th March 2023

Power conversion efficiencies (PCEs) of bulk heterojunction (BHJ) organic solar cells (OSCs) continue increasing towards the 20% milestone mainly thanks to the emerging non-fullerene acceptors (NFAs). Nevertheless, important factors for industrial application are mostly neglected, such as photostability and cost potential. Single-component organic solar cells (SCOSCs) employing materials with donor and acceptor moieties chemically bonded within one molecule or polymer, successfully overcome the immiscibility between donor and acceptor as well as the resultant self-aggregation under external stress [1]. To inspire a broader interest, in this work, the industrial figure of merit (i-FOM) of OSCs is calculated and analyzed, which includes PCE, photostability, and synthetic complexity (SC) index [2]. Based on the notable advantages of SCOSCs over the correspondent BHJ OSCs, especially the enhanced stability and simplified film processing, we systematically compare the i-FOM values of BHJ OSCs and the corresponding SCOSCs.

SCMs exhibit overall much higher i-FOM values compared with the BHJ OSCs, and the highest value reaches 0.3, which is even higher than the famous PM6:Y6, even though the PCE (8%) is only half of PM6:Y6. With the increase in efficiency, SCOSCs possess the further potential for a higher i-FOM value. Among all factors, the synthetic complexity of SCOSCs is slightly higher than that of the corresponding BHJ OSCs due to the extra synthetic step for connecting donor and acceptor moieties. This feature however overcomes the large-scale phase separation and stability issue for the corresponding BHJ systems [3]. SCOSCs based on dyad 1 exhibit surprisingly high photostability under concentrated light (7.5 suns and 30 suns), corresponding to almost unchanged device stability up to 10,000 hours under 1-sun illumination. For realizing industrial application, SCOSCs have to give a high efficiency comparable to the current high-efficiency BHJ OSCs, while BHJ should be developed in the direction of less complicated synthesis [4]. With joint efforts of researchers from multidiscipline, SCOSCs will see continuing progress in efficiency, reaching an i-FOM value enough for industrial application.

References:

[1] He, Y., Li, N., and Brabec, C.J. (2021). Single-component organic solar cells with competitive performance. Org. Mater. 03, 228–244.

[2] Li, N., McCulloch, I., and Brabec, C.J. (2018). Analyzing the efficiency, stability, and cost potential for fullerene-free organic photovoltaics in one figure of merit. Energy Environ. Sci. 11, 1355–1361.

[3] He, Y., Heumüller, T., Lai, W., Feng, G., Classen, A., Du, X., Liu, C., Li, W., Li, N., and Brabec, C.J. (2019). Evidencing excellent thermal- and photostability for single-component organic solar cells with inherently built-in microstructure. Adv. Energy Mater. 9, 1900409.

[4] He, Y., Li, N., Heumüller, T., Wortmann, J., Hanisch, B., Aubele, A., Lucas, S., Feng, G., Jiang, X., Li, W., Bäuerle, P., Brabec, C.J. (2022). Industrial viability of single-component organic solar cells. Joule 6, 1160-1171.

Acknowledgements:

Y. He is grateful for the financial support from China Scholarship Council (CSC) and the Erlangen Graduate School in Advanced Optical Technologies (SAOT). C.J.B. gratefully acknowledges the funding by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under the project numbers 182849149 – SFB 953, INST 90/917, and INST 90/1093-1; financial support through the “Aufbruch Bayern” initiative of the state of Bavaria (EnCN and SFF) and the Bavarian Initiative “Solar Technologies go Hybrid” (SolTech); and the grant “ELF-PV Design and development of solution processed functional materials for the next generations of PV technologies” by the Bavarian State Government (no. 44-6521a/20/4). W.L. is grateful for the support of Beijing Natural Science Foundation (JQ21006). N.L. acknowledges the financial support by State Key Lab of Luminescent Materials and Devices, South China University of Technology (Skllmd-2022-03).

nanoGe is a prestigious brand of successful science conferences that are developed along the year in different areas of the world since 2009. Our worldwide conferences cover cutting-edge materials topics like perovskite solar cells, photovoltaics, optoelectronics, solar fuel conversion, surface science, catalysis and two-dimensional materials, among many others.

MATSUS

Previously nanoGe Spring Meeting (NSM) and nanoGe Fall Meeting (NFM), MATSUS is a multiple symposia conference focused on a broad set of topics of advanced materials preparation, their fundamental properties, and their applications, in fields such as renewable energy, photovoltaics, lighting, semiconductor quantum dots, 2-D materials synthesis, charge carriers dynamics, microscopy and spectroscopy semiconductors fundamentals, etc.

International Conference on Hybrid and Organic Photovoltaics

International Conference on Hybrid and Organic Photovoltaics (HOPV) is celebrated yearly in May. The main topics are the development, function and modeling of materials and devices for hybrid and organic solar cells. The field is now dominated by perovskite solar cells but also other hybrid technologies, as organic solar cells, quantum dot solar cells, and dye-sensitized solar cells and their integration into devices for photoelectrochemical solar fuel production.

Asia-Pacific International Conference on Perovskite, Organic Photovoltaics and Optoelectronics

The main topics of the Asia-Pacific International Conference on Perovskite, Organic Photovoltaics and Optoelectronics (IPEROP) are discussed every year in Asia-Pacific for gathering the recent advances in the fields of material preparation, modeling and fabrication of perovskite and hybrid and organic materials. Photovoltaic devices are analyzed from fundamental physics and materials properties to a broad set of applications. The conference also covers the developments of perovskite optoelectronics, including light-emitting diodes, lasers, optical devices, nanophotonics, nonlinear optical properties, colloidal nanostructures, photophysics and light-matter coupling.

International Conference on Perovskite Thin Film Photovoltaics Perovskite Photonics and Optoelectronics

The International Conference on Perovskite Thin Film Photovoltaics Perovskite Photonics and Optoelectronics (NIPHO) is the best place to hear the latest developments in perovskite solar cells as well as on recent advances in the fields of perovskite light-emitting diodes, lasers, optical devices, nanophotonics, nonlinear optical properties, colloidal nanostructures, photophysics and light-matter coupling.